2PCS Car Battery Charger Clamps Replacement Heavy Duty,12-24V 1000A Jumper Cable Clamps with Terminals,Bolts,Nuts,Battery Clamp Heavy Duty Alligator Clips with Non-Slip Handle

CAR BATTERY CHARGER CLAMPS, ESSENTIAL FOR EMERGENCY CAR CHARGINGProduct AttributesColors: Black and RedSizes: 6.30*4.37*1.13 inchMaximum Current: 1000ACable Gauge: 2-6 AWGInput: 12-24VWeight: 12.76 ozPackage Size: 9.64*5.11*1.06 inchMaterial: PVC, Iron, CopperPackaging: Car Battery Charger Clamps*2, Crimp Terminal*2, Screws*2, Nuts*2Note: 1. If you find that the rescued vehicle will not start, check the metal contacts for poor contact2. If any electrolyte is found near the battery of the rescued vehicle, attach the black clamps to the metal casing near the engine of the rescued vehicle3. Not to connect the black clamps to the negative terminal where there is electrolyte, otherwise sparking and other problems may occurProduct Feature & Functions1. Battery clips easily fit in cars, boats, voltage testers, other devices that need to be charged2. Battery clamps are designed with o-ring crimp terminals for quick disconnection3. PVC handle is comfortable and non-slip, at the same time can avoid the risk of electric shock and short-circuit, the mouth of the clamp is made of pure copper, good electrical conductivity, the body of the clamp is made of iron, not easy to break and damage, wear-resistant and durable

• Product Specification: Wide voltage and high current adaptation, multi-device universal, jumper cable clamps support 12-24V, working current 500A, instantaneous current 1000A, compatible with 2-6 AWG cable gauge, easily adapted to cars, boats, voltage testers, other devices that need to be charged
• List of Packages: You will receive 2pcs battery cable clamps, 2pcs crimp terminals, 2pcs screws and 2pcs nuts, a full kit, no need to buy extra, easy to store and carry, you can carry with car, emergency repairs are not delayed, easy to cope with the vehicle on road without power and other emergencies
• Non-slip Handle: Battery charger clamps designed with PVC non-slip handle cover to increase grip friction and avoid slipping and off hand when using, safe and comfortable to hold, pure copper clamps with good electrical conductivity and clamping force, main body made of iron, not easy to break and damage
• Easy to Use: DIY easy to start, peel off the cable protection sleeve, pass the cable through the crimp terminal and clamp it, dismantle the PVC handle sleeve, use screws and nuts to fix the terminal and battery clamps, put back the PVC handle sleeve, installation complete
• Connection Method: Safe and error-free wiring, just connect the red positive terminal of the alligator clamps to the positive terminal of the power supply battery, and the black negative terminal to the negative terminal of the power supply battery, and you can easily complete the connection